C1278 Tvr Trident OBD Code

OBD/2 C1278 error code description and symptoms.

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

C1278 Tvr Trident Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine C1278 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If c1278 steering wheel angle 1and 2 signal faulted so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the c1278 steering wheel angle 1and 2 signal faulted.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 30-110

Common Causes of Tvr Trident C1278 OBD2 Code

A common cause of code C1278 is the failure of C1278 STEERING Wheel Angle 1and 2 Signal Faulted, but there are several other possible causes as well, such as ;

• Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
• Dirty Oil
• Erratic camshaft position due to low oil pressure
• Oil flow restriction in the oil passages or the variable camshaft timing (VCT) valve body

C1278 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C1278 code for other Tvr cars

You can view according C1278 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C1278 Tvr 1300
• C1278 Tvr 1600
• C1278 Tvr 1800
• C1278 Tvr 2500
• C1278 Tvr 3000
• C1278 Tvr 350
• C1278 Tvr 390
• C1278 Tvr 400
• C1278 Tvr 420
• C1278 Tvr 450
• C1278 Tvr 7
• C1278 Tvr Cerbera
• C1278 Tvr Chimaera
• C1278 Tvr Grantura
• C1278 Tvr Griffith
• C1278 Tvr M
• C1278 Tvr S
• C1278 Tvr Sagaris
• C1278 Tvr Se
• C1278 Tvr Speed
• C1278 Tvr T350
• C1278 Tvr T440
• C1278 Tvr Taimar
• C1278 Tvr Tamora
• C1278 Tvr Tasmin
• C1278 Tvr Tina
• C1278 Tvr Tuscan
• C1278 Tvr Type S
• C1278 Tvr V8
• C1278 Tvr Vixen

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved