C1006 Bristol 410 OBD Code

OBD/2 C1006 error code description and symptoms.

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

Some systems require that the actuator has an adequate supply of brake fluid. Low brake fluid levels can mimic the symptoms of code C1006, so consult the manual to locate the brake fluid reservoir. Bear in mind that a low fluid level can set code C1006 on some applications, so make sure that on fluid operated systems the fluid level is up to the mark before starting an electrical diagnosis.

C1006 Bristol 410 Error Code Repair Process :

The rule of C1006 code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of speed wheel lr comparison failure. Likewise, overriding the OBD C1006 error in system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 60-110

Common Causes of Bristol 410 C1006 OBD2 Code

A common cause of code C1006 is the failure of Speed Wheel LR Comparison Failure, but there are several other possible causes as well, such as ;

• Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
• Faulty Air fuel ratio (A/F) Sensor 1 Bank 1
• Camshaft Position Sensor harness is open or shorted
• Engine Control Module (ECM)

C1006 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C1006 code for other Bristol cars

You can view according C1006 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C1006 Briscoe Cloverleaf
• C1006 Bristol 400
• C1006 Bristol 401
• C1006 Bristol 402
• C1006 Bristol 403
• C1006 Bristol 404
• C1006 Bristol 405
• C1006 Bristol 406
• C1006 Bristol 407
• C1006 Bristol 408
• C1006 Bristol 409
• C1006 Bristol 411
• C1006 Bristol 412
• C1006 Bristol 450
• C1006 Bristol 603
• C1006 Bristol Beaufighter
• C1006 Bristol Blenheim
• C1006 Bristol Brigand
• C1006 Bristol Britannia
• C1006 Bristol Fighter

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved