C0550 Daihatsu Fellow OBD Code

OBD/2 C0550 error code description and symptoms.

Throttle Position (TP) Sensor Intermittent The TP sensor circuit is monitored by the PCM for sudden TP rotation angle (or voltage) input change through the comprehensive component monitor (CCM). If during the last 80 warm-up cycles in key ON engine running the PCM detects a TP rotation angle (or voltage) changes beyond the minimum or maximum calibrated limit, a continuous diagnostic trouble code (DTC) is stored. Poor continuity through the TP sensor connectors Poor continuity through the TP harness Intermittent open or short inside the TP sensor While accessing the TP V PID on the scan tool, lightly tap on the TP sensor or wiggle the TP sensor connector and harness.

At this point we are assuming that the fuses and relays are good. You will need to locate the PCM/TCM and the power input signal circuit using your vehicle information source. Unplug the connector from the PCM/TCM, place the ignition switch in the ON position, and probe the appropriate circuit with the positive test lead of the DVOM.

C0550 Daihatsu Fellow Error Code Repair Process :

If your seat horizontal motor memory position out of range check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C0550 and engine control unit are in charge of monitoring a bunch of different seat horizontal motor memory position out of range, and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Daihatsu Fellow C0550 OBD2 Code

A common cause of code C0550 is the failure of Seat Horizontal Motor Memory Position Out of Range, but there are several other possible causes as well, such as ;

Damaged VCT phaser
Faulty Crankshaft Position Sensor (POS)
Damaged VCT phaser
Faulty front heated oxygen sensor

C0550 is a kind of Chassis Trouble Code

Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

C0550 Daihatsu Fellow OBD Code

C0550 Daihatsu Fellow Error Code Repair Process :

Common Causes of Daihatsu Fellow C0550 OBD2 Code

C0550 code for other Daihatsu cars