C0502 Bugatti Type 101 OBD Code

OBD/2 C0502 error code description and symptoms.

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

Gear changes are accomplished by a command from the TCM to energize the clutch actuator to release the clutch; after which various actuators inside the transmission disengage the current gear, and depending on current operating conditions, engage the next higher or lower gear ratio. All of this happens much faster than a human driver could change gears, and in most applications, gear changes are as smooth and seamless as on any fully automatic transmission.

C0502 Bugatti Type 101 Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine C0502 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If all door lock input short to ground so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the all door lock input short to ground.

Difficulty Level (Expert)

Repair Time (35 Min.)

Cost Prediction : $ 30-110

Common Causes of Bugatti Type 101 C0502 OBD2 Code

A common cause of code C0502 is the failure of All Door Lock Input Short to Ground, but there are several other possible causes as well, such as ;

• Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
• Damaged ECM
• Exhaust gas leaks
• Faulty Mass Air Flow (MAF) sensor

C0502 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C0502 code for other Bugatti cars

You can view according C0502 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C0502 Bugatti Chiron
• C0502 Bugatti Eb110
• C0502 Bugatti Eb112
• C0502 Bugatti Eb118
• C0502 Bugatti Eb218
• C0502 Bugatti Id 90
• C0502 Bugatti Type 13
• C0502 Bugatti Type 15
• C0502 Bugatti Type 17
• C0502 Bugatti Type 18
• C0502 Bugatti Type 22
• C0502 Bugatti Type 23
• C0502 Bugatti Type 251
• C0502 Bugatti Type 30
• C0502 Bugatti Type 35
• C0502 Bugatti Type 38
• C0502 Bugatti Type 40
• C0502 Bugatti Type 41
• C0502 Bugatti Type 43
• C0502 Bugatti Type 44
• C0502 Bugatti Type 46
• C0502 Bugatti Type 49
• C0502 Bugatti Type 50
• C0502 Bugatti Type 50b
• C0502 Bugatti Type 55
• C0502 Bugatti Type 57
• C0502 Bugatti Type 64
• C0502 Bugatti Type 68
• C0502 Bugatti Type 73
• C0502 Bugatti Veyron

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved