C0414 Nissan S-cargo OBD Code

OBD/2 C0414 error code description and symptoms.

Engine Coolant Temperature (ECT) Circuit High Input Indicates the sensor signal is greater than Self-Test maximum. The ECT sensor maximum is 4.6 volts or -50 C (-58 F). Note on some vehicles that are not equipped with an ECT sensor, CHT can be used and can set this DTC. Open circuit in harness Sensor signal short to power Damaged PCM Improper harness connection Damaged sensor ECT V PID reading greater than 4.6 volts with key ON and engine OFF or during any engine operating mode indicates a hard fault.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

C0414 Nissan S-cargo Error Code Repair Process :

If your air bag diagnostic monitor ground circuit short to ground check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C0414 and engine control unit are in charge of monitoring a bunch of different air bag diagnostic monitor ground circuit short to ground, and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Nissan S-cargo C0414 OBD2 Code

A common cause of code C0414 is the failure of Air Bag Diagnostic Monitor Ground Circuit Short To Ground, but there are several other possible causes as well, such as ;

Engine Control Module (ECM)
Dirty Oil
Faulty spark plug (s)
Engine Control Module (ECM)

C0414 is a kind of Chassis Trouble Code

Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

C0414 Nissan S-cargo OBD Code

C0414 Nissan S-cargo Error Code Repair Process :

Common Causes of Nissan S-cargo C0414 OBD2 Code

C0414 code for other Nissan cars