C0168 Moretti 1000 OBD Code

OBD/2 C0168 error code description and symptoms.

Throttle Position (TP) Sensor Intermittent The TP sensor circuit is monitored by the PCM for sudden TP rotation angle (or voltage) input change through the comprehensive component monitor (CCM). If during the last 80 warm-up cycles in key ON engine running the PCM detects a TP rotation angle (or voltage) changes beyond the minimum or maximum calibrated limit, a continuous diagnostic trouble code (DTC) is stored. Poor continuity through the TP sensor connectors Poor continuity through the TP harness Intermittent open or short inside the TP sensor While accessing the TP V PID on the scan tool, lightly tap on the TP sensor or wiggle the TP sensor connector and harness.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

C0168 Moretti 1000 Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine C0168 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If seat driver front up circuit failure so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the seat driver front up circuit failure.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 30-110

Common Causes of Moretti 1000 C0168 OBD2 Code

A common cause of code C0168 is the failure of Seat Driver Front Up Circuit Failure, but there are several other possible causes as well, such as ;

• Damaged VCT phaser
• Faulty front heated oxygen sensor
• Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection
• Fuel injectors harness is open or shorted

C0168 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C0168 code for other Moretti cars

You can view according C0168 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C0168 Moretti 1100
• C0168 Moretti 1200
• C0168 Moretti 127
• C0168 Moretti 128
• C0168 Moretti 2500
• C0168 Moretti 500
• C0168 Moretti 750
• C0168 Moretti 850
• C0168 Moretti Coupe
• C0168 Moretti Fiat
• C0168 Moretti Golden Arrow
• C0168 Moretti La Cita
• C0168 Moretti Moretti
• C0168 Moretti Panoramica
• C0168 Moretti S Coupe
• C0168 Moretti Spider
• C0168 Moretti Ss

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved