C0168 Hyundai Hcd OBD Code

OBD/2 C0168 error code description and symptoms.

Throttle Position (TP) Sensor Intermittent The TP sensor circuit is monitored by the PCM for sudden TP rotation angle (or voltage) input change through the comprehensive component monitor (CCM). If during the last 80 warm-up cycles in key ON engine running the PCM detects a TP rotation angle (or voltage) changes beyond the minimum or maximum calibrated limit, a continuous diagnostic trouble code (DTC) is stored. Poor continuity through the TP sensor connectors Poor continuity through the TP harness Intermittent open or short inside the TP sensor While accessing the TP V PID on the scan tool, lightly tap on the TP sensor or wiggle the TP sensor connector and harness.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

C0168 Hyundai Hcd Error Code Repair Process :

If your seat driver front up circuit failure check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C0168 and engine control unit are in charge of monitoring a bunch of different seat driver front up circuit failure, and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Hyundai Hcd C0168 OBD2 Code

A common cause of code C0168 is the failure of Seat Driver Front Up Circuit Failure, but there are several other possible causes as well, such as ;

Damaged VCT phaser
Faulty front heated oxygen sensor
Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection
Variable Camshaft Timing (VCT) position circuit is open or shorted

C0168 is a kind of Chassis Trouble Code

Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

C0168 Hyundai Hcd OBD Code

C0168 Hyundai Hcd Error Code Repair Process :

Common Causes of Hyundai Hcd C0168 OBD2 Code

C0168 code for other Hyundai cars