C010C Bentley T OBD Code

OBD/2 C010C error code description and symptoms.

Vehicle Speed Sensor (VSS) Intermittent Indicates the powertrain control module (PCM) detected an error in the vehicle speed information. Vehicle speed data is received from either the vehicle speed sensor (VSS), transfer case speed sensor (TCSS), anti-lock brake system (ABS) control module, generic electronic module (GEM), or central timer module (CTM). This DTC is set the same way as C010C. However, it is intended to flash the transmission control indicator lamp (TCIL) for first time VSS circuit error/malfunctions. Refer to possible causes for C010C

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

C010C Bentley T Error Code Repair Process :

If your vehicle failed a C010C test and the C010C Check Engine Light is NOT on, chances are you have a problem with the OBDII system, a burned out MIL lamp, or a faulty catalytic converter. The converter is essentially an afterburner that cleans up the exhaust after it exits the engine. The OBDII system uses autolamp delay increase circuit failure a ownstream oxygen sensor to monitor the efficiency of the converter, and it should detect a drop in converter efficiency if the converter has been contaminated or is failing (ignition misfiring, leaky exhaust valves, and oil burning can all damage the converter). What you want to look autolamp delay increase circuit failure: Any conditions that might cause ignition misfire, an overly rich or lean fuel condition, or loss of compression. Use your OBD Express DIY to look at the oxygen sensor outputs, coolant temperature, airflow, calculated engine load, and inlet air temperature.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 20-50

Common Causes of Bentley T C010C OBD2 Code

A common cause of code C010C is the failure of Autolamp Delay Increase Circuit Failure, but there are several other possible causes as well, such as ;

• EVAP system hose leaking
• Exhaust tube
• Insufficient cylinders compression
• Ignition coils circuit poor electrical connection

C010C is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C010C code for other Bentley cars

You can view according C010C DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C010C Bentley 3.5-litre
• C010C Bentley 3-litre
• C010C Bentley 4.25-litre
• C010C Bentley 4.5-litre
• C010C Bentley 4-litre
• C010C Bentley 6.5-litre
• C010C Bentley 8-litre
• C010C Bentley Arnage
• C010C Bentley Azure
• C010C Bentley Brooklands
• C010C Bentley Continental
• C010C Bentley Continental Gt
• C010C Bentley Exp
• C010C Bentley Hunaudieres
• C010C Bentley Java
• C010C Bentley Mark V
• C010C Bentley Mark Vi
• C010C Bentley Mulsanne
• C010C Bentley R-type
• C010C Bentley S1
• C010C Bentley S2
• C010C Bentley S3
• C010C Bentley Speed
• C010C Bentley State
• C010C Bentley Turbo

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved