C0095 Holden Apollo OBD Code

OBD/2 C0095 error code description and symptoms.

The Throttle Position sensor signals the Engine Control Module as to the current position of the engine throttle valve.
The current throttle valve opening is based on the driver's input from the gas pedal. The ECM uses the information from this sensor to help calculate fuel delivery and spark timing.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

C0095 Holden Apollo Error Code Repair Process :

The rule of C0095 code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of door ajar lr circuit open. Likewise, overriding the OBD C0095 error in system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.

Common Causes of Holden Apollo C0095 OBD2 Code

A common cause of code C0095 is the failure of Door Ajar LR Circuit Open, but there are several other possible causes as well, such as ;

Damaged ECM
Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
Clogged or faulty fuel injector (s)
Open circuits caused by damage to wiring.

C0095 is a kind of Chassis Trouble Code

Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

C0095 Holden Apollo OBD Code

C0095 Holden Apollo Error Code Repair Process :

Common Causes of Holden Apollo C0095 OBD2 Code

C0095 code for other Holden cars