C0030 Porsche 906 OBD Code

OBD/2 C0030 error code description and symptoms.

Brake Switch Circuit Input Malfunction Indicates PCM did not receive a brake pedal position (BPP) input. Open or short in BPP circuit Open or short in stoplamp circuits Damaged PCM Malfunction in module(s) connected to BPP circuit. (Rear Electronic Module [REM] Windstar and LS6/LS8 or Lighting Control Module (LCM) Continental and Town Car. Damaged brake switch Misadjusted brake switch Check for proper function of stoplamps.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

C0030 Porsche 906 Error Code Repair Process :

If your decklid punch-out sensor battery short check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C0030 and engine control unit are in charge of monitoring a bunch of different decklid punch-out sensor battery short, and if they get a reading that's a little out of whack, up pops the check engine light.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 40-75

Common Causes of Porsche 906 C0030 OBD2 Code

A common cause of code C0030 is the failure of Decklid Punch-Out Sensor Battery Short, but there are several other possible causes as well, such as ;

• Failures of clutch motion/travel sensors.
• Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
• Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection
• Faulty Crankshaft Position Sensor (POS)

C0030 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C0030 code for other Porsche cars

You can view according C0030 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C0030 Porsche 1300
• C0030 Porsche 3400
• C0030 Porsche 356
• C0030 Porsche 550
• C0030 Porsche 718
• C0030 Porsche 804
• C0030 Porsche 901
• C0030 Porsche 904
• C0030 Porsche 907
• C0030 Porsche 908
• C0030 Porsche 910
• C0030 Porsche 911
• C0030 Porsche 911 Type 991
• C0030 Porsche 911 Type 996
• C0030 Porsche 911 Type 997
• C0030 Porsche 912
• C0030 Porsche 914
• C0030 Porsche 917
• C0030 Porsche 924
• C0030 Porsche 928
• C0030 Porsche 930
• C0030 Porsche 931
• C0030 Porsche 935
• C0030 Porsche 936
• C0030 Porsche 937
• C0030 Porsche 944
• C0030 Porsche 959
• C0030 Porsche 962
• C0030 Porsche 964
• C0030 Porsche 965
• C0030 Porsche 968
• C0030 Porsche 986
• C0030 Porsche 993
• C0030 Porsche 996
• C0030 Porsche Boxster
• C0030 Porsche Boxster Type 981
• C0030 Porsche Boxster Type 986
• C0030 Porsche Boxster Type 987
• C0030 Porsche Carrera Gt
• C0030 Porsche Cayenne
• C0030 Porsche Cayenne Type 92a
• C0030 Porsche Cayenne Type 9pa
• C0030 Porsche Cayman
• C0030 Porsche Cayman Type 718
• C0030 Porsche Cayman Type 981
• C0030 Porsche Cayman Type 987
• C0030 Porsche Coupe
• C0030 Porsche Dp
• C0030 Porsche Gt
• C0030 Porsche Gt2
• C0030 Porsche Gt3
• C0030 Porsche Karisma
• C0030 Porsche Kremer
• C0030 Porsche Macan Type 95b
• C0030 Porsche Mega
• C0030 Porsche Panamera Type 970
• C0030 Porsche Panamericana
• C0030 Porsche Rsk
• C0030 Porsche Tapiro

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved