C0030 Packard 200 OBD Code

OBD/2 C0030 error code description and symptoms.

Mass Air Flow (MAF) Sensor Intermittent The MAF sensor circuit is monitored by the PCM for sudden voltage (or air flow) input change through the comprehensive component monitor (CCM). If during the last 40 warm-up cycles in key ON engine running the PCM detects a voltage (or air flow) change beyond the minimum or maximum calibrated limit, a continuous memory diagnostic trouble code (DTC) is stored.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

C0030 Packard 200 Error Code Repair Process :

If your decklid punch-out sensor battery short check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C0030 and engine control unit are in charge of monitoring a bunch of different decklid punch-out sensor battery short, and if they get a reading that's a little out of whack, up pops the check engine light.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 40-75

Common Causes of Packard 200 C0030 OBD2 Code

A common cause of code C0030 is the failure of Decklid Punch-Out Sensor Battery Short, but there are several other possible causes as well, such as ;

• Damaged camshaft position (CMP) sensor
• Damaged camshaft position (CMP) sensor
• Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection
• Oil Control Valve (OCV) circuit is open or shorted

C0030 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C0030 code for other Packard cars

You can view according C0030 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C0030 Packard 12
• C0030 Packard 120
• C0030 Packard 300
• C0030 Packard 400
• C0030 Packard 7
• C0030 Packard A
• C0030 Packard Carribean
• C0030 Packard Cavalier
• C0030 Packard Clipper
• C0030 Packard Custom
• C0030 Packard De
• C0030 Packard Eight
• C0030 Packard Executive
• C0030 Packard Mayfair
• C0030 Packard Patrician
• C0030 Packard Super
• C0030 Packard Twelve
• C0030 Packard Twin

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved