B2960 Trouble Code

View B2960 obd/2 error code description and symptoms.

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

Some systems require that the actuator has an adequate supply of brake fluid. Low brake fluid levels can mimic the symptoms of code B2960, so consult the manual to locate the brake fluid reservoir. Bear in mind that a low fluid level can set code B2960 on some applications, so make sure that on fluid operated systems the fluid level is up to the mark before starting an electrical diagnosis.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 30-110

B2960 Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine B2960 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If vehicle speed sensor low input so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the vehicle speed sensor low input.

B2960 is a kind of Body Trouble Code Auto body problems aren't always easy to spot. Diagnosing auto body problems sometimes requires a little know-how. In this section you'll find articles dedicated to teaching you how to diagnose auto body problems.

Common Causes of B2960

A common cause of code B2960 is the failure of Vehicle Speed Sensor Low Input, but there are several other possible causes as well, such as ;

• Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
• Faulty front heated oxygen sensor
• Fuel tank leaking
• Damaged ECM

B2960 code for all cars

You can view according B2960 DTC for your car model. We selected several models to see obd2 solutions click and view it.

+B2960 Riley Pathfinder

+B2960 Citroen Tub

+B2960 Zastava 850

+B2960 Renault Twingo 3

+B2960 Ford F-250

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved