B2930 Trouble Code

View B2930 obd/2 error code description and symptoms.

Output Shaft Speed sensor circuit intermittent failure The output shaft speed sensor signal to the PCM is irregular or interrupted.
Harness connector not properly seated Harness intermittently shorted, or open Harness connector damaged OSS sensor damaged, or not installed properly Verify harness and connector integrity Verify OSS sensor proper installation.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 60-110

B2930 Error Code Repair Process :

The rule of B2930 code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of evaporative emission control system pressure sensor intermittent. Likewise, overriding the OBD B2930 error in system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.

B2930 is a kind of Body Trouble Code Auto body problems aren't always easy to spot. Diagnosing auto body problems sometimes requires a little know-how. In this section you'll find articles dedicated to teaching you how to diagnose auto body problems.

Common Causes of B2930

A common cause of code B2930 is the failure of Evaporative Emission Control System Pressure Sensor Intermittent, but there are several other possible causes as well, such as ;

• Camshaft Position Sensor harness is open or shorted
• Damaged camshaft position (CMP) sensor
• Damaged ECM
• Damaged VCT phaser

B2930 code for all cars

You can view according B2930 DTC for your car model. We selected several models to see obd2 solutions click and view it.

+B2930 Talbot Sunbeam-lotus

+B2930 Mega Track

+B2930 Ohta Pk

+B2930 Vauxhall Meriva B

+B2930 Datsun Skyline

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved