U1743 Nissan Mm OBD Code

OBD/2 U1743 error code description and symptoms.

Engine Coolant Temperature (ECT) Circuit High Input Indicates the sensor signal is greater than Self-Test maximum. The ECT sensor maximum is 4.6 volts or -50 C (-58 F). Note on some vehicles that are not equipped with an ECT sensor, CHT can be used and can set this DTC. Open circuit in harness Sensor signal short to power Damaged PCM Improper harness connection Damaged sensor ECT V PID reading greater than 4.6 volts with key ON and engine OFF or during any engine operating mode indicates a hard fault.

On some transmissions, such as automated manual transmissions or automatic transmissions with manual mode, the GSP switch lets the TCM know whether or not the driver has selected automatic or manual function. On manual transmissions, the GSP switch informs the TCM which gear the driver is selecting, and may function as a neutral safety switch, depending on system design. The TCM also uses the gate select position switch to monitor transmission operation. For example, if the driver selects manual mode and selects 3rd gear on an automatic transmission, the TCM may monitor speed sensors to detect clutch and brake slippage.

U1743 Nissan Mm Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine U1743 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If mirror driver/passenger switch circuit failure so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the mirror driver/passenger switch circuit failure.

Common Causes of Nissan Mm U1743 OBD2 Code

A common cause of code U1743 is the failure of Mirror Driver/Passenger Switch Circuit Failure, but there are several other possible causes as well, such as ;

Engine Control Module (ECM)
Engine Control Module (ECM)
Faulty Air Flow Meter
Oil Control Valve (OCV) circuit is open or shorted

U1743 is a kind of Network Trouble Code

U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

U1743 Nissan Mm OBD Code

U1743 Nissan Mm Error Code Repair Process :

Common Causes of Nissan Mm U1743 OBD2 Code

U1743 code for other Nissan cars